1984 - 1994
SKI-DOO SAFARI
Iridium spark plug
| DENSO
DENSO
Fits to:
SKI-DOO (BRP) SAFARI SCOUT 377 E [1989 - 1989]
SKI-DOO (BRP) SAFARI 503 [1988 - 1988
SKI-DOO (BRP) SAFARI 370 L 2 [1992 - 1994
SKI-DOO (BRP) SAFARI 520 Grand Luxe LC [1986 - 1986
SKI-DOO (BRP) SAFARI 250 Citation [1989 - 1990
SKI-DOO (BRP) SAFARI 250 Citation E [1989 - 1990
SKI-DOO (BRP) SAFARI 447 [1986 - 1987
SKI-DOO (BRP) SAFARI 503 R [1988 - 1988
SKI-DOO (BRP) SAFARI 377 Saga [1989 - 1989]
SKI-DOO (BRP) SAFARI 377 LE [1990 - 1991]
SKI-DOO (BRP) SAFARI 377 L [1990 - 1991]
SKI-DOO (BRP) SAFARI 440 LX [1990 - 1991
SKI-DOO (BRP) SAFARI 440 LXE [1990 - 1991
SKI-DOO (BRP) SAFARI 470 LCE [1991 - 1991]
SKI-DOO (BRP) SAFARI 377 E [1984 - 1988]
SKI-DOO (BRP) SAFARI 500 Cheyenne [1989 - 1989
SKI-DOO (BRP) SAFARI 370 LE 2 [1992 - 1992
SKI-DOO (BRP) CHEYENNE 500 [1991 - 1991
SKI-DOO (BRP) SAFARI SCOUT 370 [1992 - 1992
SKI-DOO (BRP) CHEYENNE 500 R [1990 - 1990
SKI-DOO (BRP) SAFARI 470 LCE 2 [1992 - 1992]
SKI-DOO (BRP) SAFARI 470 GLX [1990 - 1992]
SKI-DOO (BRP) SAFARI 470 LC [1990 - 1990]
SKI-DOO (BRP) SAFARI 377 [1984 - 1988]
SKI-DOO (BRP) SAFARI SCOUT 377 [1989 - 1990]
Specifications
| Manufacturer | DENSO |
|---|---|
| Heat range | 24 |
| Model | Iridium Power |
| Terminal configuration | threaded Stud |
| Thread size | 14 mm |
| Style | IW24 |
| Type | Resistor Type |
| Units | Each |
| Center electrode type | Fine Wire |
| Electrode tip material | Iridium |
| Center electrode projection | Non-Projected |
| Thread reach | 19,1 mm (3/4") |
| Hex size | 20,6 mm (13/16") |
| Spark gap | 0,7 mm (0,028") |
| Ground electrode shape | Grooved| Taper Cut |
| Electrical resistance | 5k Ohms |
| Spark gap imperial | 0.028" |
| Spark gap metric | 0.7 mm |
Product description
Six times harder than platinum, iridium withstands temperatures up to 4,000°F Because the iridium electrodes of these plugs can be shrunk to only 0.4mm, voltage requirements decrease while firing performance improves 360° laser welding of electrode provides a seal that resists wear even in the worst conditions Ground electrode features a tapered cut and U-groove that form a large volume area for the flame's center